Eddy Current Separator - Strong Efficient Separation
Fill in Application Data & submit for a quote
See Product and Application Photos
Watch Dings Eddy Current in Operation
"We switched to Dings Magnetics after a competitor eddy current separator failed causing over three weeks of downtime. Dings is very responsive to our needs and the Fine Eddy Current Separator we purchased from them has been running since day one!"
FEATURES | |
Rare Earth Magnets | ![]() |
Deep Magnetic Field | ![]() |
Larger Magnetic Field | ![]() |
Triple Layer Protection | ![]() |
BENEFITS | |
High strength, long life | |
Increases non ferrous recovery | |
Excellent recovery of heavy non ferrous metals | |
Longer life, lower maintenance and repair costs |
4740 W Electric Ave
Milwaukee WI
53219
Ph 414-672-7830 Fax 414-672-5354
Material is fed onto the conveyor belt of the eddy current separator, which moves it across the magnetic rotor where separation occurs. The two streams of material discharge into a housing. The housing has a splitter to divide the non-ferrous metal from the non-metallic material, such as paper, plastic, wood or fluff.
The key component of the eddy current separator is the magnetic rotor, which has a series of permanent rare earth magnets mounted on a support plate attached to a shaft. The magnetic rotor is surrounded by (but not attached to) a wear shell which supports the conveyor belt. This allows the rotor to spin independently and at a much higher speed than the wear shell and belt.
When a piece of non-ferrous metal, such as aluminum, passes over the separator, the magnets inside the rotor rotate past the aluminum at high speed. This forms eddy currents in the aluminum which in turn create a magnetic field around the piece of aluminum. The polarity of that magnetic field is the same as the rotating magnet, causing the aluminum to be repelled away from the magnet. This repulsion makes the trajectory of the aluminum greater than that of the nonmetallics, allowing the two material streams to be separated.
Model 9100
Rotor Diameter: 7"
Belt Width: up to 48"
Applications: Material Recycling Factilities,
Aluminum can recycling
Model 9500
Rotor Diameter: 13"
Belt Width: up to 96"
Applications: Severe duty applications
such as auto shredding & high volume
Materal Recycling Facilities
NEW - ECCENTRIC DESIGN - SEE FEATURES BROCHURE
Model 9900
Rotor Diameter: 9"
Belt Width: 36", 48" and 60"
Applications: Electronic scrap metal processors, aluminum can recycling, small particle processing & recovery operations
SurroundScan Metal Detectors from Advanced Detection Systems-Dings' sister company
Copyright © 2007- Dings Magnetic Group